Mobile No: 09925028439 | 09825328439 Email : jagdish@ambicagrp.com | ravi@ambicagrp.com

INDUSTRIAL OIL IMMERSION HEATERS/ ALKALINE / CHEMICAL HEATER/ LEAD HEATER/Bobbin Heater

INDUSTRIAL OIL IMMERSION HEATERS/ ALKALINE / CHEMICAL HEATER/ LEAD HEATER/Bobbin Heater

Specification

-          STANDARD VOLTAGE: 240 to 440 V OTHER THAN THAT PLEASE CONSULT

-          STANDARD DIAMETER:8.2 MM AND 11 MM OTHER THAN THAT PLEASE CONSULT

-          MAXIMUM TEMPERATURE: 250 DEGREE

-          STANDARD SHEATH MATERIAL SS 304

-          CONNECTION STUD WILL BE PROVIDED.

-          HIGH VOLTAGE TESTED.

-          LEAKAGE CURRENT (COLD) : <_ 0.5 Ma for 240 V 

-          DIAMETER TOLERANCE: ±  0.02 TO 0.06

-          RESISTANCE TOLERANCE: ± 5% TO 10%

-          WATTAGE TOLERANCE: ± 5% TO 10%

-          LENGTH TOLERANCE: ± 1% MIN.1 MM

Features

-          Sheath Material from SS/  incoloy/ Titanium/ Alkaline ETC.

-          MGO Insulation.

-          Precisely design with uniform heat distribution.

-          High Strength.

-          CUSTOMIZED SIZE & DESIGN

-          Brass as well M.S. & SS flanges is available.

-          Silver Brazing. 

Industries & Applications

-          Radiant Heating

-          Dies and Manifolds.

-          Immersion Heating.

-          Solar.

-          To Heat Up water in any Industries.

-          Textile Industries.

-          CHEMICAL HEATING

-          To Heat Up OIL in any Industries.

Ordering Information

-          FLANGE DIAMETER/ THICKNESS/ NO’S OF HOLES

-          PCD HOLES AND THEIR DIAMETER.

-          FLANGE THICKNESS

-          ONE SIZE THREAD WOULD BE THERE IF 2 SIDE WANT PLEASE CONSULT.

-          FLANGE MATERIAL

-          LENGTH OF SHEATH IN MM AFTER FLANGE.

-          SPECIFIY IF CONNENECTION WIRE WANTED.

-          VOLTAGE & WATTAGE.

-          ANY SPECIFIC COLD ZONE (STANDARD COLD ZONE WILL BE 5 MM MIN.)

-          OTHER THAN STANDARD SHEATH MATERIAL PLEASE MENTION WHICH WANTED.

-          IF FLP HEAD WANTED SPECIFY IN ADVANCE.